Joyetech 1000 mAh EGO T-2 Upgrade Pass Through Battery.
The Best quality EGO Battery Availible for a very good price.
The biggest improvement of eGo-T 2 upgrade battery: it has two modes to switch. One is the constant voltage output mode which gives constant 3.3V(when it's driving the atomizer (load added)) and is the same as the normal eGo-T. The other is variable voltage output mode, in this mode, the voltage will change from 4.15V to 3.6V as the lithium battery power decrease. With higher voltage up to 4.15V, this give you a better vapor feeling. Meanwhile, it is easier to switch, check below:
Switching operation and features:
1. From constant voltage output mode to new battery voltage voltage output:
1.1 When the mode is 3.3v constant output mode, lock the battery by 5 clicks first(white LED blinks 3 times).
1.2 By pressing button for 5 seconds(not 5 clicks), LED will change to orange with 3 blinks. The battery has switched to variable voltage output mode(battery voltage output mode).
1.3 Then click the button for 5 times, then you can smoke in battery voltage output.
1.4 In new battery voltage output mode, the LED is orange.
1.5 When charging, orange LED will blink 5 times in this new mode.
2. From new battery voltage output to constant voltage output mode:
2.1 In new battery voltage output mode, lock the battery by 5 clicks first(orange LED blinks 3 times).
2.2 By pressing button for 5 seconds(not 5 clicks), LED will change to white with 3 blinks. And the mode has switched to 3.3V constant voltage output mode.
2.3 Then click the button for 5 times, then you can smoke in 3.3V constant voltage.
2.4 In 3.3V constant voltage, the battery features has no difference from present eGo-T battery.
2.5 When charging, white LED blinks 5 times in this new mode.
No Discount codes allowed on JoyTech Products.